Project Of The Day- Beaded Tilt Sensor

From How to Get What You Want:

“A heavy metal bead strung on conductive thread and surrounded by conductive fabric petals, makes for a simple six way digital tilt switch. When the metal bead makes contact with one of the petals it completes the circuit to an LED light, causing it to light up. This very simple technique for detecting direction of tilt can be used in many different ways and variations, and this swatch aims to illustrate the basic functionality of the design.”

Materials:
copper polyester taffeta fabric, silver plated nylon fabric, Karl-Grimm copper thread 7×1 fach verseilt kupfer blank 3981, silver plated nylon thread 117/17 2ply, heavy metal bead, glass/plastic beads, green or black silk taffeta fabric, cotton thread, HeatnBond fusible interfacing, solder, 0603 surface mount green LEDs, CR2032 coin-cell battery

Materials Links:
SMD LEDs >> https://www.sparkfun.com/products/11169
Conductive fabrics >> http://lessemf.com/fabric.html
Conductive thread >> https://www.sparkfun.com/products/8544
HeatnBond >> http://www.amazon.com/Thermoweb-Heatn-Ultra-iron-on-Adhesive-17/dp/B0010EM76A/ref=sr_1_1?ie=UTF8&qid=1373608717&sr=8-1&keywords=heatnbond

Step-by-Step Instructions:
A square of silk fabric is cut out, the edges folded and sewn to reduce fraying. The conductive petals are lasercut from copper fabric with fusible adhesive backing and fused to the silk base fabric with an iron on medium heat. The coin-cell battery holder is lasercut from stretch conductive fabric, singeing it’s edges to keep them from fraying. The battery pouch is sewn on with a silverized nylon thread which then connect the positive side of the battery to the heavy metal bead. The negative battery lead is made by tying knots at the end of a piece of copper thread and then sewing from the inside of the center of the battery pocket to the the GNDs of all LED lights. The LED lights are soldered on, their positive lead connecting to the copper fabric petal, and their negative lead connecting to the copper thread. The silk base fabric can take high temperatures and does not burn or melt when soldering directly on its surface.

Project Source Link

Advertisements

Leave a comment

Filed under DIY

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s